Quick verdict
The P Series is the serious, permanent option in iGarden's swim jet lineup: unlimited mains-powered runtime and, on the P230, a genuinely demanding 4.0 m/s current for competitive training. Step down to the P100 for casual lap swimming and recovery work, or look at iGarden's portable X Series if built-in installation and mains wiring aren't worth it for your pool.
Ideal for
- Serious lap swimmers training against real current
- Owners building or renovating a pool who want a permanent swim current
- Multi-user households needing modes from light recovery to competitive training
Not ideal for
- Owners who want a no-installation, plug-and-play swim current
- Budget shoppers, given pricing from about $2,000 to $4,800
- Existing pools where deck-drilling installation isn't feasible or wanted
The full picture
The Swim Jet P Series is iGarden's built-in, permanently installed counter-current swim machine, wired to household power (110-120V, 60Hz) instead of a battery, so there's no runtime countdown during a training session. It spans four models, the P100, P160, P200, and P230, with motor power climbing from 400 W to 1200 W (1.6 HP) and flow output climbing from 450 GPM to 1,100 GPM, topping out at a 4.0 m/s (13.1 ft/s) max current on the P230. All models share five swim modes (Free, Training - Light/Moderate/High, and Play) with flow adjustable from 0 to 100%, a Ramjet-Profile nozzle for a wide fan-shaped current, and controls split across a touchscreen panel, Wi-Fi app, and Bluetooth remote. Installation is built-in for new or renovated pools, with turnkey deck-drilling offered for existing pools.
iGarden Swim Jet P Series at a glance
- Type
- Built-in / permanent (mains-powered)
- Flow rate (GPM)
- 1,100
- Max water speed
- 4.0 m/s (13.1 ft/s) on P230
- Swim modes
- 5 modes: Free, Training (Light / Moderate / High), Play
- Flow adjustment
- 0-100% adjustable
- Motor power
- 400 W (P100) to 1200 W / 1.6 HP (P230)
- Voltage
- 110-120V, 60Hz
- Installation
- Built-in or deck-mounted (turnkey install offered)
- Controls
- Touchscreen + Wi-Fi app + Bluetooth remote
- App control
- Yes
- Waterproofing
- IP68 stainless-steel motor
- Pool type
- In-ground (new or existing)
- Notable feature
- Unlimited mains-powered runtime, up to 1100 GPM and 4 m/s
Source: Specs sourced from store.igarden.ai product listing for the Swim Jet P Series (P100, P160, P200, P230); flow rate, current speed, motor and supply power, swim modes, and pricing are manufacturer-claimed figures. The P100 is sold store-only and is not listed on Amazon; other models may vary by retailer availability.
This is a research-based review — our analysis draws on manufacturer specifications, manuals, warranty terms, and verified owner feedback rather than our own hands-on testing, and we note where a detail couldn't be confirmed. How we review
The in-depth review
The iGarden Swim Jet P Series is a built-in, mains-powered counter-current swim machine designed to turn a home pool into a lap-swimming setup without the size of a full lap pool. Unlike battery-powered portable swim jets that run for a fixed number of minutes per charge, the P Series wires into household power and runs as long as you want to swim. It comes in four models, from the entry P100 to the flagship P230, each stepping up motor power and current speed so buyers can match the unit to how seriously they train.
The standout spec: unlimited runtime, real flow
Because the P Series draws from mains power (110-120V, 60Hz) instead of a battery, there's no runtime countdown to work around. That's the core trade-off this series is built around: a more involved installation in exchange for training sessions that aren't capped at 20 or 30 minutes. Flow output scales sharply across the lineup. The P100 pushes 450 GPM with a max current speed of 2.4 m/s (7.9 ft/s), suitable for casual lap swimming and recovery work. The P160 steps up to 720 GPM and 2.9 m/s. The P200 reaches 900 GPM and 3.5 m/s. The P230, the top model, is rated for 1,100 GPM and a 4.0 m/s (13.1 ft/s) max current, which is a genuinely demanding pace intended for competitive-level swim training rather than casual exercise.
Swim modes and current control
All four models share the same control logic: five swim modes (Free Mode, Training - Light, Training - Moderate, Training - High, and Play Mode) with flow adjustable from 0 to 100% within each. That range lets one household use the same unit for a slow-paced warm-up, a structured training set, or open play for kids, without needing a second device. iGarden's Ramjet-Profile nozzle is designed to produce a wide, fan-shaped current rather than a narrow jet stream, which is meant to give swimmers a more even resistance across their stroke instead of fighting a single pinpoint blast of water.
Build, controls, and installation
The motor is described as a Next-Gen PMSM stainless-steel unit rated IP68, and the whole system runs on 12V ultra-low-voltage electronics with GFCI auto shut-off, which is the standard safety approach for powered equipment that lives in and around pool water. Controls come in three forms: a full touchscreen panel on the unit itself, Wi-Fi app control, and a Bluetooth handheld remote, so you're not limited to walking over to the unit to change modes mid-swim. Rated operating water temperature runs from 41 to 104 F, covering most three-season and heated-pool use. Installation is built-in, meaning it's designed for new pool construction or a renovation, though iGarden also offers turnkey deck-drilling installation for existing pools, and ran free installation as part of its sale pricing.
Trade-offs to know
This is a permanent, professionally installed fixture, not a plug-and-play accessory, and that's the main thing to weigh against iGarden's own portable X Series. Pricing climbs quickly across the lineup: the P100 runs around $1,999 on sale ($2,399 list), the P160 around $2,999 ($3,599 list), the P200 around $3,599 ($4,299 list), and the P230 around $3,999 ($4,799 list). The P100 is also store-only, not sold through Amazon. iGarden hasn't published dimensions, weight, minimum pool size, or installation time for any model, so buyers planning an installation will need to confirm those details directly with iGarden or an installer before committing.
Performance breakdown
Research-based editorial judgments from specs, warranty terms, and verified owner feedback — not lab measurements. How we score
Pros and cons
What works
- Unlimited mains-powered runtime with no battery countdown
- Up to 1,100 GPM flow and a 4.0 m/s current on the flagship P230 for serious training
- Flexible control via touchscreen, Wi-Fi app, and Bluetooth remote, plus 5 swim modes with 0-100% flow adjustment
What doesn't
- Requires built-in or professional deck-drilled installation, not a plug-and-play unit
- Pricing climbs quickly across the lineup, up to nearly $4,800 list on the P230
- iGarden hasn't published dimensions, weight, or minimum pool size, so installation planning needs direct confirmation
Best alternatives to iGarden Swim Jet P Series
iGarden
iGarden Swim Jet X Series
Best portable swim jet
A portable, battery-powered swim jet that clamps onto almost any pool in under a minute and creates a real lap-swimming current with no construction.
Frequently asked questions
How is the Swim Jet P Series different from a portable swim jet?
The P Series is built-in and wired to household mains power (110-120V), so it runs continuously with no battery to recharge. Portable swim jets like iGarden's own X Series run on batteries with a fixed runtime per charge but don't require permanent installation.
Which P Series model should I choose?
The P100 (450 GPM, 2.4 m/s) suits casual lap swimming and recovery work. The P160 and P200 add more flow and speed for regular training. The P230 (1,100 GPM, 4.0 m/s) is built for competitive-level swim training against a strong current.
Can the P Series be installed in an existing pool?
Yes. While the system is designed as a built-in feature for new or renovated pools, iGarden also offers turnkey deck-drilling installation for existing pools, and offered free installation during its sale period.
Is the Swim Jet P Series safe to install near pool water?
iGarden rates the system as IP68 waterproof with a 12V ultra-low-voltage operating design and GFCI auto shut-off, which are standard safety measures for equipment installed in and around pool water.
What swim modes does the P Series offer?
All four models share five modes: Free Mode, Training - Light, Training - Moderate, Training - High, and Play Mode, with flow adjustable from 0 to 100% within each mode.
How much does the iGarden Swim Jet P Series cost?
Pricing runs from around $1,999 on sale ($2,399 list) for the P100 up to around $3,999 on sale ($4,799 list) for the P230, with the P160 and P200 priced in between. The P100 is sold store-only and isn't available on Amazon.